Frequently Asked Questions
- Q: What does the PostEverywhere load and truck posting service do?
- The PostEverywhere posting service simultaneously places your load and truck postings on multiple Internet posting sites. You install our software on your computer, then enter website account information (required for some sites) just once. Now you can enter your load and/or truck information once and send to multiple websites with a click of the mouse. Remove your postings just as easily when they are no longer available. top of page
- Q: Can I search for loads and trucks with PostEverywhere service?
- PostEveryhere service is for posting, not for searching. Posting your available loads or trucks while also searching improves you chances of covering or finding a load in the least amount of time. For a list of site to seach on, see our Find Loads page.top of page
- Q: What are the system requirements?
- Minimum System Requirements:
Windows 98
66MHz 486 Processor
24MB RAM
6MB hard disk space
800x600 monitor resolution
Dial-up Internet connection
- Recommended System Specifications:
Windows 98SE or later
300MHz Pentium® Processor or higher
64MB RAM
6MB hard disk space
800x600 monitor resolution
High-Speed Internet connection
top of page
- Q: How do I start my free trial?
- After you have installed and launched the PostEverywhere software, press the Start Trial button on the startup page. You will be asked to create a Name Tag and password for yourself, and to enter contact information which will be sent along with your postings. After entering this information, press the Submit button and your trial will be activated. No credit card or billing information is needed to start your trial. top of page
- Q: How long does my free trial last?
- The free trial lasts for a period of 30-days, and includes sending up to 20,000 postings. Some additional service options are not available during your trial period. top of page
- Q: How much does PostEverywhere cost?
- PostEverywhere service starts at $19.95 a month for a single user account and includes sending up to 20,000 postings per billing cycle. Additional users cost $10.00 per monthly billing cycle, no postings included. Additional users draw from postings from the primary account. Additional postings and other service options are available. Prices listed only apply to accounts paying directly to Grizella Corporation. top of page
- Q: How do I pay for PostEverywhere service?
- To make a payment, go to the My Account tab and press the Make Payment/Manage Accounts button. This will take you to our payment site, where you can make payments by credit card, or print your own invoices. You may make credit card payments for 1 month at a time, with an Auto Pay option available. We accept Visa, MasterCard, American Express and Discover. If you pay by check or ComChek® you may pay for 1 month or make a larger payment which will be applied to future charges. There is a check fee of $2.95 for each check payment. top of page
- Q: When is my payment due?
- Bills are sent by email on the 21st of each month and due within 20 days. When you make your first payment, you are set to a billing cycle ending the 20th of the month. Your first payment will be pro-rated. top of page
- Q: What happens to my account if I don't pay on time?
- Once your account has expired, you will not be able to use your PostEverywhere software until your account is paid. All of your information will remain intact, including; loads and trucks, contacts, account ID's, passwords, and reserve postings. Once your account is paid, you will be able to resume posting. If your account is suspended for payment and you pay by check, go to the payment center an print your invoice. This will give you a grace period of 7 days for us to receive and process your check. If you account is not paid by the end of the billing cycle, your account will be closed so that no additional charges will be incurred. To reactivate your account you will need to pay your outstanding balance. Call us at 701-878-9700 for assistance. top of page
- Q: Does the PostEverywhere service only send to Internet posting sites?
- No. With the PostEverywhere service you can also send postings directly to any e-mail address. To send e-mails, go to the Setup area and select Load E-mail or Truck E-mail. Press the New button on the top button bar. Enter a name and e-mail address, then press the OK button. Use the Send to E-mail List button to send your postings to e-mail addresses. Postings sent to E-mail addresses are counted the same as those sent Websites. top of page
- Q: Do I have to go to PostEverywhere.com to enter and post my loads and trucks?
- No. Once you have downloaded and installed the PostEverywhere software you use it to enter and post your loads and trucks, setup website accounts, and make use of other features. Use the icon on your desktop to launch your PostEverywhere software. There are some functions, like help and payment, which are web-based. You can access them as needed directly from the PostEverywhere software. For example, when you go to make a payment your web browser will open and you will be logged into the secure online payment site. After you have made your payment, close the browser and log back in to your PostEverywhere software. Your payment will be reflected immediately in the My Account area. top of page
- Q: How do you count the number of postings I send?
- If you send one load or truck to 10 websites (or 10 e-mail addresses), it will count as 10 postings sent. Updates count the same as new postings. Removals are not counted. Go to the My Account tab to see how many posting you have available for the current billing cycle. top of page
- Q: What are the Status and User fields for?
- The Status and User Fields, along with the Internal Note field, are for you to use as you see fit. These fields are not sent to posting sites, or in posting e-mails. If you have multiple users set up for your company, they will all be able see this information. For some suggestions, see the About Sharing page in PostEverywhere help. top of page
- Q: What is the difference between the Remove button and the Take Off Websites button?
- In the Active Loads and Active Trucks areas, you have two different ways to remove postings from websites. The Remove button will take the postings down from the websites, and remove the entry from your Active area, placing it in your Load or Truck History. If a load or truck is not currently posted to any sites, it will simply be removed to history.
- The Take Off Websites button does just that, takes the selected postings down from websites, but it leaves the entry in your Active area. This is useful if you plan to edit and re-post as a fresh posting, or if you use your PostEverywhere software to track loads and trucks until they reach their destinations. top of page